Hoverboard Battery Care: How to Charge, Store and Look After Your Hoverboard

Looking after your hoverboard properly helps you get the best from every ride. Whether you use your hoverboard regularly, bring it out at weekends or store it away during colder months, good everyday habits can help protect the battery, charger and overall condition of your device.

If you have been searching for hoverboard battery care, wondering how to charge a hoverboard safely or looking for advice on storing a hoverboard when it is not in use, this guide covers the essentials. Always follow the instructions supplied with your own model, as charging times and storage recommendations can vary.

1. Always use the correct hoverboard charger

The charger is an important part of your hoverboard’s electrical system. Use the charger supplied with your hoverboard, or an exact replacement recommended by the manufacturer or a trusted supplier. Do not assume that a charger is suitable simply because its plug fits.

Using an incompatible charger can damage equipment and may increase the risk of overheating. Check the charger and cable before each use. If you notice fraying, exposed wires, a damaged plug or unusual heat, stop using it and arrange a suitable replacement. Never attempt to repair a damaged charger with tape or makeshift parts.

For further advice on choosing a model and understanding the features to compare before buying, read our hoverboard buying guide.

2. Charge your hoverboard safely

Good charging habits are one of the most important parts of hoverboard battery safety. Follow the charging instructions for your specific model and use a suitable indoor location where you can keep an eye on the device.

• Charge on a stable, hard and level surface, away from soft furnishings and anything easily flammable.
• Keep the charger and hoverboard uncovered while charging so heat can disperse.
• Do not charge near an exit, in a hallway or anywhere that could obstruct an escape route.
• Allow the hoverboard to cool after use before connecting the charger, following the manufacturer’s guidance.
• Disconnect the charger when the charging cycle is complete.
• Do not leave the hoverboard charging while you are asleep or away from home.

Never guess the charging time or leave a device connected indefinitely. The correct charging process depends on the model and its battery system, so the manufacturer’s instructions should always take priority.

UK fire services also advise using the correct charger, avoiding unattended charging and stopping use if a battery appears damaged or unusually hot. See the London Fire Brigade’s battery and charger safety advice for further guidance.

3. Store your hoverboard in a suitable place

If your hoverboard is not being used for a while, choose a dry, secure place away from direct sunlight, radiators and other sources of heat. Avoid leaving it in a hot car, a damp shed or anywhere exposed to extreme temperatures. Very hot or cold conditions can affect rechargeable batteries and may damage other components.

Keep the hoverboard away from water and damp. Although some models may have limited water-resistance claims, this does not mean they are waterproof. Do not leave your hoverboard outside in the rain or clean it by spraying it with a hose. Check your model’s instructions before using any cleaning products or moisture near its charging port.

For longer periods without use, consult the manufacturer’s guidance on the recommended battery charge level and how often, if at all, the battery should be checked. There is no single storage routine that is right for every hoverboard.

4. Keep the wheels, footpads and body clean

Cleaning your hoverboard regularly helps you spot wear and damage before your next ride. Switch the device off and disconnect it from the charger before cleaning. Use a soft, slightly damp cloth on the outer surfaces, taking care to keep moisture away from openings, charging sockets and electrical components.

Remove loose dirt from around the wheels and check that nothing is trapped where it could affect movement. Do not use excessive water, immerse the hoverboard or open the casing to clean inside. If dirt or debris appears to have entered the device, seek advice from a suitably qualified repairer.

It is also worth checking the tyres, wheel areas, footpads and outer casing for cracks or signs of impact. If the hoverboard has been dropped heavily or knocked against a hard surface, inspect it carefully before using it again.

5. Know the warning signs of a battery problem

Stop using and charging your hoverboard if you notice signs that could indicate a battery or electrical fault. These include:

• The battery or body appears swollen, distorted or unusually misshapen.
• The device becomes unusually hot, particularly when it is not being used.
• You notice an unusual chemical smell, hissing, popping or crackling sounds.
• There is smoke, melting, leaking or visible damage.
• The charger, plug or cable shows signs of damage or overheating.

Do not open the hoverboard, puncture the battery, attempt a battery modification or continue charging to see whether the problem goes away. Stop using the device and contact the manufacturer, retailer or a suitably qualified technician for advice. If a battery is smoking or a fire occurs, move away, get everyone to safety and call 999. Do not put yourself at risk by trying to handle a burning battery.

If your hoverboard needs attention, visit our hoverboard repair page for information about repair support. Do not use the device again until it has been checked and declared safe.

6. Get into a simple pre-ride check routine

Before each ride, take a moment to check the hoverboard. Make sure the body and footpads are secure, the wheels are clear of debris and there are no obvious cracks or signs of damage. Check that the battery indicator behaves as described in your model’s instructions and that the device responds normally when switched on.

Wear suitable protective equipment, including a correctly fitted helmet and appropriate pads, and practise in a suitable private area away from traffic, pedestrians and obstacles. In the UK, hoverboards are classed as powered transporters and their use on public roads and pavements is restricted. Read the latest GOV.UK guidance on powered transporters before riding.

7. Choosing a hoverboard that suits your needs

Good care starts with choosing a hoverboard that is suitable for the intended rider and use. Consider the rider’s age and experience, the model’s recommended user weight, wheel size, features and the manufacturer’s instructions. Avoid choosing on appearance alone: check the product information and make sure the model is appropriate for the person who will use it.

If you are comparing different styles or looking for an alternative way to enjoy your hoverboard, explore the hoverboard and hoverkart bundles. You can also browse the latest offers on our Black Friday hoverboards page when seasonal promotions are running. Check each product page for current availability, specifications, warranty information and delivery terms.

Enjoy your hoverboard and look after it

A little attention goes a long way: use the correct charger, follow the model’s charging instructions, store the hoverboard in a dry place away from extreme temperatures, keep it clean and never ignore signs of damage. Most importantly, put safety first and seek professional advice if something does not seem right.

At HOVERBOARD-PRO, you can explore our range of hoverboards for sale in the UK and hoverkart options, with a 12-month warranty on all hoverboards and free guaranteed next-day DPD delivery for UK Mainland customers, subject to our delivery terms. Browse the range and choose a model that suits your rider.

Important: This article provides general care information, not model-specific technical instructions. Always follow the manual supplied with your hoverboard. If the advice in your manual differs from this guide, follow the manufacturer’s instructions.